 |
Click on a photo below to find your trailer.
Photos may show optional features and are subject to design change.
How the Manual Tilt Works: The powerful hydraulic ram jack is operated by hand to tilt the bed up. (Much faster than handling ramps.) Slowly release the pressure valve on the jack to lower the bed down at the rate you choose.
Disclaimer: Arizona built aluminum trailers may have different design features. Please ask for details.
Please contact your nearest H&H Dealer for pricing, additional information, and parts.
Aluminum C-Series SpeedLoader MXCA
Manual Tiltbed Trailer
Standard Features
- All 6005 Aluminum billet frame, tongue, & cross members.
- Manual hydraulic ram jack - hand operated.
- Powder-coated steel substructures.
- 2 5/16" A-frame Posi-Lock coupler.
- 2000lb coupler mounted jack.
- 2x8 wood decking.
- Reverse dovetail, taper cut under the deck for a lower approach angle.
- Multiple stake pocket tie-downs.
- Removable aluminum teardrop fenders.
- Tandem 3500lb spring axles - 7000lb GVWR.
- 4-wheel electric brakes with break-away kit & battery.
- ST205-15 C rated bias tires on 15" white wheels.
- Full LED lighting system with Slimline LED taillights.
- Wiring enclosed in conduit.
MODEL |
DECK WIDTH |
DECK LENGTH |
| T8.5HD18 MXCA MAN/HYD | 82" |
18ft |
| T8.5HD20 MXCA MAN/HYD | 82" |
20ft |
LO-PRO MODEL |
||
| T8.5HD16 MXCAL MAN/HYD | 82" |
16ft |
| T8.5HD18 MXCAL MAN/HYD | 82" |
18ft |
| T8.5HD20 MXCAL MAN/HYD | 82" |
20ft |
L-models will include 4" dropped axles, low profile tongue, 4" raised coupler, and 3-degrees less lean angle. |
||
Copyright © 2010 H&H Trailers, LLC. All rights reserved.